If you are unsure of the cooling capacity you require or the type of cooler to suit your application, please contact our sales office.

Immersion Cooler

This Immersion Cooler, when used with the Ratek TH5 Thermoregulator will allow accurate temperature control to ±0.1°C at and below ambient temperatures. When used with an insulated water bath, up to 20 litres can be controlled, depending on the heat load.

Recirculating Cooler

The RC2 uses an identical cooling unit to the RC1, but rather than a flexible line and coil, has a built in heat exchanger. When connected to a suitable waterbath via the inlet and outlet fittings, water is pumped through the heat exchanger, cooled then returned to the bath. Temperature control as with the RC1 is provided by an external temperature controller.

Recirculating Cooler

This refrigerated waterbath will hold approximately 12 litres of water and can cool to -10°C. with the use of suitable additives. When used with the Ratek TH5 Thermoregulator, temperature control from 0°c to 99.9° with a stability of ± 0.05°c is possible, (The TH5 can be factory set with a minimum of -20° if required) . The built in heavy duty recirculating pump has a glandless magnetic head that reduces the possibility of leaking and contamination.